This is a short review of the Soundbrenner Core smartwatch with a vibrating metronome and tuner for musicians.

Let’s take a quick look at the functions that this watch has.

The vibration metronome allows you to adjust the vibration intensity and different light colors.

Magnetic tuner for guitar, bass, ukulele, etc.

The Decibel meter allows you to check the sound levels around you so you can take action and protect your ears.

Smartwatch.
It can display notifications from a smartphone, accept, and decline
calls. Also, the Core has a timer and a stopwatch.

Additionally, there is splash resistant according to IP65 technology.
It can withstand light rain or light water splashes (no immersion).

The battery holds a charge for more than 4 days in watch mode or more
than 3 hours of metronome playback.

The metronome comes in such a sturdy cardboard box.

There are three different straps – one rag for the wrist, the second one is longer (to be worn on the leg or on the body), and the third, silicone.

The metronome is attached to the strap using two magnets, which allows you to remove the watch for use as a tuner without removing the strap.

The Core turns on when the top button is held down for one second. After activation, a clock appears on the screen. When you press the bottom key, the smartwatch menu pops up. It contains 6 points that change when the wheel rotates. There are metronome, tuner, decibel meter, timer, stopwatch, and settings.

In the settings, you can set the tempo you need, which can be changed by rotating the wheel. Also, here you can set any musical temp. Such as 3/4, 4/4, etc. Using the application, you can put a certain color and vibration strength for each of the metronome beats. There are 3 locations to save the settings for each beat.

To start and stop the metronome, just like in the previous version of
Sounbrenner Pulse, you need to hit the screen twice with your fingers.

To turn off the smartwatch, you need to hold down the upper button for 3 seconds and then press the lower one.

To connect the metronome to the app, you need to turn on Bluetooth and geolocation. When entering the settings, you can set vibration strength and duration for each metronome count. Also, you can choose a color for each beat. Currently, there are more than 10 colors available.

If you have any questions about this smartwatch for musicians, feel free to ask me in the comments under the video. I will try to answer all of your questions.